How to connect a mobile OLT optical modem device to a wireless router

The interface on the back of the OLT optical cat device usually has four network interfaces. Generally, the broadband installation personnel who come to the door will set one of the interfaces to output network signals, and use a network cable to connect it to the WAN port of the router. The specific introduction is as follows:

1. Check the network interface on the back of the router; Usually, routers have a total of 5 network cable interfaces. Most routers have a network cable interface with a different color from others, which is called the WAN interface; After finding the WAN interface, the other interfaces are called 【 LAN1 】, 【 LAN2 】, 【 LAN3 】, and 【 LAN4 】 respectively;

2. Then check the ports on the back of the optical modem, which usually have four network ports and two voice ports. Generally, the broadband installation personnel at the door will set up one port to output network signals, and another port can be connected to the broadband TV set-top box for use; The OLT optical modem device connects one end of the network cable to the optical modem and the other end to the WAN port of the router;

3. The LAN port on the OLT optical modem router is used to connect internet devices. You can use a network cable to connect one end to the LAN port of the router and the other end to the network interface of the computer;